We’ve constantly been working on our house since we moved in. Kitchen, bathrooms, paint, full basement remodel—it’s been busy.
We decided it was time to tackle a smaller project in our basement. We’ve wanted to transform an awkward space between two doors in the basement and make it useful with some built-in shelving! We’re incredibly happy with the results.
The Build
This was a pretty straight forward project. I purchased primed pine boards from Home Depot as our base material and put everything together with screws. Each screw was countersunk so it could be hidden under wood putty.
First, I mounted some rails into the studs to establish the shelf spacing.
I worked my way up from the bottom, measuring each shelf board and front piece. Nothing is square or plumb, so each shelf is a different width.
After cut to length, the shelves and front piece were glued and pin nailed together to hold them in place while drying. Then, finished with some wood putty and sanded.
Once the shelves were all in place and secured with some screws into the back rails, all the countersunk holes were covered in wood putty and the edge and front joints were caulked to give it that really nice built-in appearance.
Finishing
Years ago I built a set of shelves in a closet and finished them with a trick that I found on a carpentry forum. It’s now my go-to trick for finishing surfaces that will take some abuse, like shelves.
It’s really simple:
- Prime and paint your shelf boards in flat latex paint
- After a good painted finish is achieved, add several coats of water based polyurethane, sanding lightly with high grit sandpaper between coats.
I’ve used this for shelves, a small section wood floor in a closet and a few other small projects over the years and I love how it turns out. It’s a nice smooth finish to the touch, it’s durable and stands up to wear. And you can make the shelves match anything by using the appropriate paint color!
And that’s it! Great project, lots of room to store books… and room for toy bins below for the future.